Delphix Products

  • 1.  Can't associate a Masking Job with the dSource

    Posted 05-25-2016 03:39:00 PM
    Hi all,

    as described here: https://docs.delphix.com/display/DOCS50/Provisioning+Masked+VDBs#ProvisioningMaskedVDBs-AssociateaMa...

    I should have been able to select a masking job to associate with the dSource, but I can't see any job in the right window. The job is rightly configured in the masking server with the option "Multi Tenant" enabled. What do I have to check again?
    Thank you.
    Gianpiero
    #Masking


  • 2.  RE: Can't associate a Masking Job with the dSource
    Best Answer

    Posted 05-25-2016 03:42:00 PM
    Hi Gianpiero

    You may want to refresh the browser OR try logging out and login again OR try to use a different browser altogether.

    Hope this helps

    thanks
    Ganesh


  • 3.  RE: Can't associate a Masking Job with the dSource

    Posted 05-25-2016 03:47:00 PM
    God bless you! You saved me.
    Closed and reopened my Google Chrome and .... voila! The job appeared!


  • 4.  RE: Can't associate a Masking Job with the dSource

    Posted 05-02-2018 03:25:00 PM

    "Multi Tenant" wasn't helping me. The only solution for me was to run these commands on the Delphix engine:


    delphix1> maskingjob
    delphix1 maskingjob> fetch
    delphix1 maskingjob fetch *> commit
        Dispatched job JOB-81535
        MASKINGJOB_FETCH job started for "unknown".
        MASKINGJOB_FETCH job for "unknown" completed successfully.
    delphix1 maskingjob>





  • 5.  RE: Can't associate a Masking Job with the dSource

    Posted 05-07-2018 07:18:00 AM

    Hi Gianpiero,

    It seems you are using a delphix version lower than 5.2, and the cause of this behavior is flush (yes you can blame it).

    Just notice that this disappears within the newer version 5.2 and upper because of no more flush usage (thanks JS and HTML5)

    Regards,

    Mouhssine



  • 6.  RE: Can't associate a Masking Job with the dSource

    Posted 05-07-2018 07:29:00 AM
    Did you mean "flash" (Adobe browser component)?
    Thank you for your info.
    Gianpiero


  • 7.  RE: Can't associate a Masking Job with the dSource

    Posted 05-07-2018 07:52:00 AM

    Yep, that's it.

    You can do a simple test as follows :

    0/ connect to admin console
    1/ connect to masking console and create a new masking job
    2/ try to associate the new job with a dsource
    >> you will not see your new created job
    3/ refresh the admin console and notice in action menu <fetching masking job>
    >> this means that virtualization engine is asking if there is any new masking job to get from masking engine
    4/ check back the dsource you will see the masking job new and can associate it

    Flash is bad this is one of the reasons that everyone moves to new technologies like HTML5, JS and so (delphix did it with the move to 5.2)

    You ha a great paper one delphix's blog about that cf. https://www.delphix.com/fr/blog/eliminate-flash">https://www.delphix.com/fr/blog/eliminate-flash">https://www.delphix.com/fr/blog/eliminate-flash

    Regards,

    Mouhssine


  • 8.  RE: Can't associate a Masking Job with the dSource

    Posted 05-07-2018 10:45:00 AM
    sorry for mistaken typo flash and not fluch :)