Delphix Products

Hi, I am trying to install Delphix demo, While doing the delphix web setup am getting the below error message in System Configure Storage "No Storage Devices found to configure. Please check ur connected storage devices and re-discover". Since I haven't install Sybase ASE 15.7. Is it required to install Sybase ASE 15.7. If so where i need to install whether in my local machine or VM. and How to install Sybase ASE? Please Help on this.

#DemoEnvironment

Hey Livingston.

From I understand, you are at the delphix setup screen where you need to add storage devices. This has nothing to do with Sybase. 

It looks like you past up step 2d from the Quick install doc:
https://docs.delphix.com/display/LS22/Quick+Start+Guide+for+the+Delphix+Landshark+Environment

Powerdown your Delphix Engine, add three 8GB thin-provisioned SCSI disks to your Delphix Engine VM, then power the Delphix Engine back on and proceed with the document as you did.

Hi Adam,

Yes I have not added the three 8GB this-provisioned SCSI disks to  my Delphis Engine. Where I can add this one. Can you please guide me on this with the Steps? Thanks in Advance

Are you using VMware Workstation, Fusion, or ESXi?

Yes am using VMware Workstation

1. Power Down your delphix engine
2. Right-click your vm in vmware worsktation
3. Choose settings
   
4. In the "Virtual Machine Settings" window, click Add
5. If prompted to allow changes, click yes
6. In the "Add Hardware Wizard", select Hard Disk and click Next
7. Select SCSI, leave Independent unchecked. Click Next
8. Select Create a new virtual disk, click Next
9. In Maximum disk size, type 8. Leave "Allocate all disk space now" unchecked, click Next
10. Click Finish
11. Repeat steps 4-10 two more times.
12. Click OK
13. Power on your DE

Thanks Adam for your quick response.

I have selected 1. Typical and then gave next
then I got three options like
1. Installer Disk  - In this I can select only my CD Drive. My Harddisk drive not displayed
2. Installer Disk Image File  - In this am not able to select anything since i dont have any iso file.
3. I will install the operating system later

Which one I can choose in these three options.

It appears that you some how went to the New Machine Wizard, that is incorrect. Step 2 and 3 from above should look like this:
">https://d2r1vs3d9006ap.cloudfront.net/s3_images/1299785/21773-yhkpks_inline.png?1445965946">

I updated the Quick Install guide docs with screenshots for each step. Take a look there for other screenshots.

Thank you so much Adam. That Issue Solved.

Supreme. Glad to help.