Delphix Products

Expand all | Collapse all

how to configure the storege pool setting up Landshark

Jump to Best Answer

Per Wallqvist10-22-2015 07:29:00 PM

Rich Morrissey10-22-2015 07:33:00 PM

Per Wallqvist10-22-2015 08:54:00 PM

Per Wallqvist10-22-2015 08:55:00 PM

Rich Morrissey10-27-2015 04:39:00 PM

  • 1.  how to configure the storege pool setting up Landshark

    Posted 10-21-2015 09:41:00 PM
    Hi, 
    i am trying to set up the landshark environment.

    When i run the delphix setup and get to the storage section, it don't detect any storage.

    Do i have to set up disks my self, thought it was pre configured on the images?
    Is there any documentation on this?

    Best regards, 
    Per
    #DemoEnvironment


  • 2.  RE: how to configure the storege pool setting up Landshark

    Posted 10-21-2015 11:01:00 PM
    Yes, the storage in the 30 day Delphix demo as well as Delphix Express should be preconfigured.
    Could you send us a screen shot of the storage page when you are doing the configuration of Delphix?

    Thanks
    Kyle



  • 3.  RE: how to configure the storege pool setting up Landshark

    Posted 10-21-2015 11:03:00 PM
    Hi Per,
    This doc: Quick Start Guide for Landshark might also help


  • 4.  RE: how to configure the storege pool setting up Landshark

    Posted 10-21-2015 11:47:00 PM
    This is the link for the Quick Start guide for the current version of Landshark 2.2 https://docs.delphix.com/display/LS22/Quick+Start+Guide+for+the+Delphix+Landshark+Environment


  • 5.  RE: how to configure the storege pool setting up Landshark

    Posted 10-22-2015 07:27:00 PM
    Hi Kyle here is the screen I'm getting. I can't get past here;


  • 6.  RE: how to configure the storege pool setting up Landshark

    Posted 10-22-2015 07:29:00 PM
    same for me


  • 7.  RE: how to configure the storege pool setting up Landshark

    Posted 10-22-2015 07:30:00 PM
    Yes, that's not the way it should look.
    What is the name of the Delphix OVA file you are using ?

    Thanks
    Kyle



  • 8.  RE: how to configure the storege pool setting up Landshark

    Posted 10-22-2015 07:33:00 PM
    Delphix_4.3.2.1_2015-10-14-00-08_HWv8_Demo.ova


  • 9.  RE: how to configure the storege pool setting up Landshark

    Posted 10-22-2015 07:35:00 PM
    Delphix_4.3.2.0_2015-10-01-22-48_HWv8_Demo.ova

    Running VMWare Fusion 8.0 on Mac


  • 10.  RE: how to configure the storege pool setting up Landshark

    Posted 10-22-2015 07:44:00 PM
    We are using ESXi 5.1. I did thin provision the drive for the Demo engine.


  • 11.  RE: how to configure the storege pool setting up Landshark

    Posted 10-22-2015 08:54:00 PM
    Now it works for me after adding 3 scsi drivers :)


  • 12.  RE: how to configure the storege pool setting up Landshark

    Posted 10-22-2015 08:55:00 PM



  • 13.  RE: how to configure the storege pool setting up Landshark

    Posted 10-22-2015 09:30:00 PM
    yes, there seems to be a problem with the current 30 day demo build. The storage is not preconfigured. You can just configure it with 3 LUNs of say 10 GB each.  You probably also want to set the vCPUs down from 8 to 1 and memory down from 8 GB to 2 GB if you are installing this on a laptop type environment.

    Also, we have a free version of Delphix, called Delphix Express, that is pre-configured with storage at 25GB, 1 vCPU and 2 GB of memory. Delphix Express will be on the download site at http://pages.delphix.com/Free-Trial-Request.html soon. For now, if you go to http://pages.delphix.com/Free-Trial-Request.html">http://pages.delphix.com/Free-Trial-Request.html">http://pages.delphix.com/Free-Trial-Request.html and put "express" as your title, I'll send Delphix Express instead of 30 day demo

    - Kyle



  • 14.  RE: how to configure the storege pool setting up Landshark



  • 15.  RE: how to configure the storege pool setting up Landshark
    Best Answer

    Posted 10-27-2015 04:31:00 PM
    I have updated the Quick Install Guide for VMware to be more clear around the need to add virtual disks and included some screenshots depicting how to do this in VMware Workstation (it is very similar in Fusion and ESX).


  • 16.  RE: how to configure the storege pool setting up Landshark

    Posted 10-27-2015 04:39:00 PM
    Thanks, adding the 3 disk resolved the issue for us.