Delphix Products

#self_service #self-service #virtualization

Hi Team,

I have a very basic question.

If i add a dSource as a source in Data Template, and then add a vDB provisioned from that source as a Container in the created Template, then :

1. When i refresh the container through Self-Service, does it only refresh the vDB from the source which is the dSource, OR,
2. It first refreshes the dSource from the real source and then refreshes the vDB to the latest copy ?, OR,
3. The behavior is configurable to have both options ?

Regards,
Mayank

#self_service #self-service #virtualization

Hi Team,

I have a very basic question.

If i add a dSource as a source in Data Template, and then add a vDB provisioned from that source as a Container in the created Template, then :

1. When i refresh the container through Self-Service, does it only refresh the vDB from the source which is the dSource, OR,
2. It first refreshes the dSource from the real source and then refreshes the vDB to the latest copy ?, OR,
3. The behavior is configurable to have both options ?

Regards,
Mayank

Thank you Marcin.

I had the same understanding, but why I am getting confused is because :

1. The refresh operation is ongoing for about 45 minutes now for the vDB (Container)
2. In the management app, under Actions - i see a job whose description says "Update Self-Service Source" and it refers to my dSource by name. Wat would this job be doing then ?

Regards,
Mayank

#self_service #self-service #virtualization

Hi Team,

I have a very basic question.

If i add a dSource as a source in Data Template, and then add a vDB provisioned from that source as a Container in the created Template, then :

1. When i refresh the container through Self-Service, does it only refresh the vDB from the source which is the dSource, OR,
2. It first refreshes the dSource from the real source and then refreshes the vDB to the latest copy ?, OR,
3. The behavior is configurable to have both options ?

Regards,
Mayank

Thank you Marcin.

I had the same understanding, but why I am getting confused is because :

1. The refresh operation is ongoing for about 45 minutes now for the vDB (Container)
2. In the management app, under Actions - i see a job whose description says "Update Self-Service Source" and it refers to my dSource by name. Wat would this job be doing then ?

Regards,
Mayank

#self_service #self-service #virtualization

Hi Team,

I have a very basic question.

If i add a dSource as a source in Data Template, and then add a vDB provisioned from that source as a Container in the created Template, then :

1. When i refresh the container through Self-Service, does it only refresh the vDB from the source which is the dSource, OR,
2. It first refreshes the dSource from the real source and then refreshes the vDB to the latest copy ?, OR,
3. The behavior is configurable to have both options ?

Regards,
Mayank

Thank you Marcin. 

The dSource has the latest snapshot from 19th July and then lots of logs after that until today, so perhaps that is the reason. Once this completes, I will take a new snapshot for the dSource and then retry the refresh to confirm the observation.

As for the network performance :

Delphix --> Target -- bandwidth is 8 Gbps, latency is in micro secs :)

Thank you Marcin.

I had the same understanding, but why I am getting confused is because :

1. The refresh operation is ongoing for about 45 minutes now for the vDB (Container)
2. In the management app, under Actions - i see a job whose description says "Update Self-Service Source" and it refers to my dSource by name. Wat would this job be doing then ?

Regards,
Mayank

#self_service #self-service #virtualization

Hi Team,

I have a very basic question.

If i add a dSource as a source in Data Template, and then add a vDB provisioned from that source as a Container in the created Template, then :

1. When i refresh the container through Self-Service, does it only refresh the vDB from the source which is the dSource, OR,
2. It first refreshes the dSource from the real source and then refreshes the vDB to the latest copy ?, OR,
3. The behavior is configurable to have both options ?

Regards,
Mayank

Thank you Marcin. 

The dSource has the latest snapshot from 19th July and then lots of logs after that until today, so perhaps that is the reason. Once this completes, I will take a new snapshot for the dSource and then retry the refresh to confirm the observation.

As for the network performance :

Delphix --> Target -- bandwidth is 8 Gbps, latency is in micro secs :)

Thank you Marcin.

I had the same understanding, but why I am getting confused is because :

1. The refresh operation is ongoing for about 45 minutes now for the vDB (Container)
2. In the management app, under Actions - i see a job whose description says "Update Self-Service Source" and it refers to my dSource by name. Wat would this job be doing then ?

Regards,
Mayank

#self_service #self-service #virtualization

Hi Team,

I have a very basic question.

If i add a dSource as a source in Data Template, and then add a vDB provisioned from that source as a Container in the created Template, then :

1. When i refresh the container through Self-Service, does it only refresh the vDB from the source which is the dSource, OR,
2. It first refreshes the dSource from the real source and then refreshes the vDB to the latest copy ?, OR,
3. The behavior is configurable to have both options ?

Regards,
Mayank

Thank you Marcin. 

The dSource has the latest snapshot from 19th July and then lots of logs after that until today, so perhaps that is the reason. Once this completes, I will take a new snapshot for the dSource and then retry the refresh to confirm the observation.

As for the network performance :

Delphix --> Target -- bandwidth is 8 Gbps, latency is in micro secs :)

Thank you Marcin.

I had the same understanding, but why I am getting confused is because :

1. The refresh operation is ongoing for about 45 minutes now for the vDB (Container)
2. In the management app, under Actions - i see a job whose description says "Update Self-Service Source" and it refers to my dSource by name. Wat would this job be doing then ?

Regards,
Mayank

#self_service #self-service #virtualization

Hi Team,

I have a very basic question.

If i add a dSource as a source in Data Template, and then add a vDB provisioned from that source as a Container in the created Template, then :

1. When i refresh the container through Self-Service, does it only refresh the vDB from the source which is the dSource, OR,
2. It first refreshes the dSource from the real source and then refreshes the vDB to the latest copy ?, OR,
3. The behavior is configurable to have both options ?

Regards,
Mayank

Thank you Marcin. 

The dSource has the latest snapshot from 19th July and then lots of logs after that until today, so perhaps that is the reason. Once this completes, I will take a new snapshot for the dSource and then retry the refresh to confirm the observation.

As for the network performance :

Delphix --> Target -- bandwidth is 8 Gbps, latency is in micro secs :)

Thank you Marcin.

I had the same understanding, but why I am getting confused is because :

1. The refresh operation is ongoing for about 45 minutes now for the vDB (Container)
2. In the management app, under Actions - i see a job whose description says "Update Self-Service Source" and it refers to my dSource by name. Wat would this job be doing then ?

Regards,
Mayank

#self_service #self-service #virtualization

Hi Team,

I have a very basic question.

If i add a dSource as a source in Data Template, and then add a vDB provisioned from that source as a Container in the created Template, then :

1. When i refresh the container through Self-Service, does it only refresh the vDB from the source which is the dSource, OR,
2. It first refreshes the dSource from the real source and then refreshes the vDB to the latest copy ?, OR,
3. The behavior is configurable to have both options ?

Regards,
Mayank

Thank you Marcin. 

The dSource has the latest snapshot from 19th July and then lots of logs after that until today, so perhaps that is the reason. Once this completes, I will take a new snapshot for the dSource and then retry the refresh to confirm the observation.

As for the network performance :

Delphix --> Target -- bandwidth is 8 Gbps, latency is in micro secs :)

Thank you Marcin.

I had the same understanding, but why I am getting confused is because :

1. The refresh operation is ongoing for about 45 minutes now for the vDB (Container)
2. In the management app, under Actions - i see a job whose description says "Update Self-Service Source" and it refers to my dSource by name. Wat would this job be doing then ?

Regards,
Mayank

#self_service #self-service #virtualization

Hi Team,

I have a very basic question.

If i add a dSource as a source in Data Template, and then add a vDB provisioned from that source as a Container in the created Template, then :

1. When i refresh the container through Self-Service, does it only refresh the vDB from the source which is the dSource, OR,
2. It first refreshes the dSource from the real source and then refreshes the vDB to the latest copy ?, OR,
3. The behavior is configurable to have both options ?

Regards,
Mayank