Delphix Products

Expand all | Collapse all

How to discard failed network test?

Jump to Best Answer
  • 1.  How to discard failed network test?

    Posted 01-13-2017 01:01:00 PM
    Hello,
    during execution of network throughput test, server went offline. 

    NETWORK_THROUGHPUT_TEST_EXECUTE job for "IP" failed due to an error during execution: Unable to SSH to host "IP". [6 hours ago]

    After trying to run on different server appears:

    The selected port number "50001" is in use by another test.

      Action: Provide a different port number or let the Delphix Engine select a port number by leaving the parameter unset. [now]

    We are unable to cancel job (in CLI and GUI)
     or parent action to run the test on this port. Could you please advise




  • 2.  RE: How to discard failed network test?
    Best Answer

    Posted 01-13-2017 04:28:00 PM
    Hi Igor,

    My apologies for the issues you are facing today. Could you do the following:

    1. Log into the Delphix CLI using your sysadmin credentials.
    2. Enter job.
    3. Enter ls.
    4. Copy the output and paste it into a reply.

    This would be helpful in determining why this behavior is occurring.

    Thanks,

    Srish


  • 3.  RE: How to discard failed network test?

    Posted 01-16-2017 06:44:00 AM
    Under job ls we can see only last few snapsyncs that are COMPLETED.

    JOB-15357  FAILED     FAILED             2017-01-13T08:13:14.275Z  target2                           Execute a network throughput test.

       type: Job    name: (unset)
        actionType: NETWORK_THROUGHPUT_TEST_EXECUTE
        cancelable: true
        emailAddresses: (unset)
        events: [ ... ]
        jobState: FAILED
        parentAction: ACTION-36892
        parentActionState: FAILED
        percentComplete: 0%
        queued: false
        reference: JOB-15357
        startTime: 2017-01-13T08:13:14.275Z
        suspendable: false
        target: target2
        targetName: target2
        targetObjectType: UnixHost
        title: Execute a network throughput test.
        updateTime: 2017-01-13T08:13:15.087Z
        user: user2

       type: Action    actionType: NETWORK_THROUGHPUT_TEST_EXECUTE
        details: Execute a network throughput test.
        endTime: 2017-01-13T08:13:14.953Z
        failureAction: Make sure "target2" is running and is reachable via SSH from the Delphix Engine.
        failureDescription: Unable to SSH to host "target2".
        failureMessageCode: exception.host.ssh.connection.failed
        reference: ACTION-36892
        startTime: 2017-01-13T08:13:14.163Z
        state: FAILED
        title: NETWORK_THROUGHPUT_TEST_EXECUTE
        user: user2
        userAgent: Delphix CLI
        workSource: WEBSERVICE
        workSourceName: user2




  • 4.  RE: How to discard failed network test?

    Posted 01-18-2017 09:52:00 PM
    Hi Igor,

    My apologies for the delayed response. The job is marked as FAILED. Jobs actively running will be marked as RUNNING. Any jobs that are finished would be labeled as COMPLETED or FAILED. Therefore, you would not need to manually cancel this job as it has already ended.

    I hope this answers your question. Please feel free to contact me if you need anything else.

    Thanks,

    Srish


  • 5.  RE: How to discard failed network test?

    Posted 01-19-2017 08:13:00 AM
    I think that I should contact support.
    After starting throughput test we are getting:
    "Executing network throughput transmit test.    Measured throughput of 0 Mbps.
        The selected port number "50001" is in use by another test.
      Action: Provide a different port number or let the Delphix Engine select a port number by leaving the parameter unset."


  • 6.  RE: How to discard failed network test?

    Posted 01-19-2017 04:41:00 PM
    Hi Igor,

    I created a support ticket for you for this issue. We can continue our correspondence there.

    Thanks,

    Srish